 The
riveting tools are single - handed operating
tools for drawing and riveting different kinds
of blinds bolts. The tool is sturdy in construction,
durable in use,easy in operation as well as
labour and time saving, and applicable for
large-scale riveting work.
Operation Instructions:
Connect air supply before operation, insert
the bolt mandrel into the head of riveting
tool when the desired air pressure has been
attained , and them insert the blind bolt
into the hole of workpiece to be riveted.
Pull the trigger, the bolt will then expand
and the work piece is fastened while the mandrel
is broken.
The broken mandrel in the head of the tool
will drop out just by slanting the tool forward
or backward. |
|
|
|
|
| Air pressure used: |
4.8 kg/cm2-6 kg/cm2 |
| Weight: |
1.8 kg |
| Working distance: |
17.5 mm |
| Overall Dimensions: |
310X75X230 mm |
|
| |
 This
QLM-CH-III Pneumatic Blind Rivet Gun is innovated
on the product of QLM-CH-I.
Operation Instructions:
Connect air supply before operation, insert
the bolt mandrel into the head of riveting
tool when the desired air pressure has been
attained , and then insert the blind bolt
into the hole of workpiece to be riveted.
Pull the trigger, the bolt will then expand
and the work piece is fastened while the mandrel
is broken.
The broken mandrel in the head of the tool
will drop out just by slanting the tool forward
or backward. |
|
|
|
| Air pressure used: |
4.8 kg/cm2-6 kg/cm2 |
| Weight: |
1.8 kg |
| Working distance: |
25 mm |
| Overall Dimensions: |
320X82X245 mm |
|
| |
 |
|
 The
Manually Operated Blind Riveting Tool is a
special tool to rivet various size of rivets.
Use hands as the tools's power. With the elastic
force of its pull rods, the riveting tool
makes the core of tool back and forth to attain
drawing and riveting.
The tool is easy in operation and quick in
riveting. The workpiece can be riveted sturdily
and neatly. It is not restricted to rivet
the structural member which is sealed and
difficult to be riveted. This riveting tool
is an indispensable one to raise labour productivity.
Instructions for use::
The nosepiece of the riveting tool should
be used according to the dimension of rivet
diameter required,and screw down the nosepiece.
When operating, insert the rivet into the
holeof workingpiece to be riveted,pushtighrly
the head of riveting tool perpendicularly
against the workingpiece with the mandrel
of rivet inserted completely the nosepiece
of the riveting tool,then close the pull rods
so as to enable the rivet to expend,and workpiece
is fastened. |
|
|
|
| Working road: |
12 mm |
| Pulling strengh: |
5880 N (when 49N force is acted
on the pull rod |
| suitable range for use: |
φ3-φ5 (mm) blind rivets |
| weight:: |
1.43 kg |
| Overall dimension: |
460X100X30 mm |
| |
|
|
